How To Apply Vinyl Stickers

How To Apply Vinyl Stickers

Firstly, don't stress, it really is easy - just take your time as many of our stickers have small details. You will have your sticker on the car in no time. (See full instructions below video).

 

@thenakedbike #HPRadicalReuse #applyvinyldecal #vinyldecal #applysticker #vinyldecalbusiness #stickershopaustralia #etsystore #ebaystore #thenakedbike #ufos #ufosticker #easyapplication #australianmade #shopaustralia #myshop ♬ Sunrise - Official Sound Studio

 

Instructions:

For best results, apply decals in dry environment with temperature at least 15 degrees C / 55 degrees F.

STEP 1: Clean the area thoroughly with soap and water. Do not use Windex or similar products because it will leave a residue behind that will prevent the sticker from adhering well.

STEP 2: Prepare the sticker for application by firmly rubbing a squeegee or credit card across the clear transfer tape. This removes any air bubbles that may have formed and makes the sticker cling to the transfer tape.

STEP 3: Peel the backing paper off the sticker slowly (especially taking care with finer detailed designs). If the sticker clings to the backing, slowly replace the paper backing and repeat Step 2.

STEP 4: Slowly lower the sticker onto the surface and rub it in place firmly with a squeegee or credit card removing any air bubbles or creases. For best results, wait up to an hour before moving to the next step.

STEP 5: Slowly peel the transfer tape off at a 45 degree angle. Be careful not to pull the sticker from the surface – especially for finer detailed designs. If the sticker pulls away from the surface, repeat Step 4.

 

#applying stickers